搜索
News
Location:
Homepage
/
/
Introduction to the production process of anti-corrosion power fittings

Introduction to the production process of anti-corrosion power fittings

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-06-28
  • Views:0

【概要】Introduction to the production process of anti-corrosion power fittings

  The problem to be solved is that the existing gold has effective resistance to acid and alkali corrosion. The manufacturing process of corrosion-resistant power accessories is as follows:

   1. First, remove the dirt on the surface of the power accessories, and then apply a layer of paint evenly to increase the toughness and flexibility on the surface of the power accessories.

   2. Apply a layer of epoxy resin on the joint, and place a layer of glass cloth before the epoxy layer hardens.

  3. Cover the surface of the fittings covered with glass cloth with two layers of epoxy resin. After the two layers of epoxy resin are cured, apply three layers of epoxy resin, spread two layers of glass cloth, and then cure the three layers of epoxy resin. Next, apply four layers of epoxy on the two layers of glass cloth.

   Continue to coat four epoxy layers with one or more epoxy layers. Continue to coat the second layer of epoxy with one or more layers of epoxy. The corrosion-resistant hardware consists of two layers: a flexible layer coated on top of the hardware, a layer of epoxy resin, a layer of glass cloth and a layer of epoxy resin. Coat three layers of epoxy resin on every two layers of epoxy resin, place two layers of glass cloth, and coat four layers of epoxy resin. Corrosion-resistant power accessories are manufactured in a new way and have the advantages of corrosion resistance, good insulation performance, good mechanical bearing capacity, and good flexibility.

Introduction to the production process of anti-corrosion power fittings

【概要】Introduction to the production process of anti-corrosion power fittings

  The problem to be solved is that the existing gold has effective resistance to acid and alkali corrosion. The manufacturing process of corrosion-resistant power accessories is as follows:

   1. First, remove the dirt on the surface of the power accessories, and then apply a layer of paint evenly to increase the toughness and flexibility on the surface of the power accessories.

   2. Apply a layer of epoxy resin on the joint, and place a layer of glass cloth before the epoxy layer hardens.

  3. Cover the surface of the fittings covered with glass cloth with two layers of epoxy resin. After the two layers of epoxy resin are cured, apply three layers of epoxy resin, spread two layers of glass cloth, and then cure the three layers of epoxy resin. Next, apply four layers of epoxy on the two layers of glass cloth.

   Continue to coat four epoxy layers with one or more epoxy layers. Continue to coat the second layer of epoxy with one or more layers of epoxy. The corrosion-resistant hardware consists of two layers: a flexible layer coated on top of the hardware, a layer of epoxy resin, a layer of glass cloth and a layer of epoxy resin. Coat three layers of epoxy resin on every two layers of epoxy resin, place two layers of glass cloth, and coat four layers of epoxy resin. Corrosion-resistant power accessories are manufactured in a new way and have the advantages of corrosion resistance, good insulation performance, good mechanical bearing capacity, and good flexibility.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2021-06-28
  • Views:0
Information

Introduction to the production process of anti-corrosion power fittings

  The problem to be solved is that the existing gold has effective resistance to acid and alkali corrosion. The manufacturing process of corrosion-resistant power accessories is as follows:

   1. First, remove the dirt on the surface of the power accessories, and then apply a layer of paint evenly to increase the toughness and flexibility on the surface of the power accessories.

   2. Apply a layer of epoxy resin on the joint, and place a layer of glass cloth before the epoxy layer hardens.

  3. Cover the surface of the fittings covered with glass cloth with two layers of epoxy resin. After the two layers of epoxy resin are cured, apply three layers of epoxy resin, spread two layers of glass cloth, and then cure the three layers of epoxy resin. Next, apply four layers of epoxy on the two layers of glass cloth.

   Continue to coat four epoxy layers with one or more epoxy layers. Continue to coat the second layer of epoxy with one or more layers of epoxy. The corrosion-resistant hardware consists of two layers: a flexible layer coated on top of the hardware, a layer of epoxy resin, a layer of glass cloth and a layer of epoxy resin. Coat three layers of epoxy resin on every two layers of epoxy resin, place two layers of glass cloth, and coat four layers of epoxy resin. Corrosion-resistant power accessories are manufactured in a new way and have the advantages of corrosion resistance, good insulation performance, good mechanical bearing capacity, and good flexibility.

Scan the QR code to read on your phone

Download

There is currently no content to display
Please add data record on website background.

Recommended news

LINKS:baidu | kangbaite

Contact Us

Add:West area of Hejian Economic Development Zone, Cangzhou, Hebei Province

Message

Please leave your valuable comments or suggestions and contact information (email or phone), so that we can reply to you in time!

留言应用名称:
Customer message
描述:
验证码

Hebei KA-Better Electric Power Technology Co., Ltd.

There are 20 lines of forging equipment from 125 tons to 2500 tons, more than 200 sets of automatic NUMERICAL control equipment, 20 automatic raw material cutting lines...

FLANGES

          WeChat

FLANGES

          Mobile

Online customer service
Customer service hotline
0086-317-3603260 0086-317-3603260
Service time:
8:00 - 18:30
Customer service group:
Service
Skype:
Skype:
WhatsApp:

Hebei KA-Better Electric Power Technology Co., Ltd.   冀ICP备2021006979号-1   Powered by www.300.cn