搜索
Product
Location:
Homepage
/
Product

Product

Contact us

Add:Hejian Economic Development Zone, Hebei Province

Tel:0086-317-3603260

           0086 15031703566(Wechat)

E-mail:daisy@kangao.com.cn

Alibaba:kangao.en.alibaba.com

 

Forging power fittings
In the heating process, it is necessary to manually put the blank into the induction heating ring, and after heating, the heated blank needs to be taken out and put into the cavity of the forging equipment mold. The labor intensity is high, the production efficiency is low, and the lack of safety is insufficient. Because there is no flash, the utilization rate of the material is higher. It is possible to complete the finishing of complex forgings with one process or several processes. Because there is no flash, the force-bearing area of the forging is reduced, and the required load is also reduced. However, it should be noted that the blanks cannot be completely restricted. For this reason, the volume of the blanks should be strictly controlled, the relative position of the forging dies and the measurement of the forgings should be controlled, and efforts should be made to reduce the wear of the forging dies.
Details 白箭头 黑箭头
Petroleum bit forgings
It is made of new materials with high strength, high elasticity, high temperature resistance and high wear resistance, and the surface is treated with solid lubricants. While reducing the relative linear velocity of the bearing pair, it also reduces the temperature rise of the friction surface, which can effectively improve the bearing life and bearing reliability under high drilling pressure or high speed drilling conditions.
Details 白箭头 黑箭头
Forging power fittings
In the heating process, it is necessary to manually put the blank into the induction heating ring, and after heating, the heated blank needs to be taken out and put into the cavity of the forging equipment mold. The labor intensity is high, the production efficiency is low, and the lack of safety is insufficient. Because there is no flash, the utilization rate of the material is higher. It is possible to complete the finishing of complex forgings with one process or several processes. Because there is no flash, the force-bearing area of the forging is reduced, and the required load is also reduced. However, it should be noted that the blanks cannot be completely restricted. For this reason, the volume of the blanks should be strictly controlled, the relative position of the forging dies and the measurement of the forgings should be controlled, and efforts should be made to reduce the wear of the forging dies.
Details 白箭头 黑箭头
Forging type contact net fittings
According to the characteristics of railway catenary fittings, in order to shorten the design and manufacturing cycle of forging dies, reduce mold costs and increase the service life of forging dies, a design of quick-change combined forging dies is introduced from the aspects of mold structure, material selection, mold processing and use, etc. Ideas. After production verification, significant results have been achieved. Forging materials are mainly carbon steel and alloy steel with various compositions, followed by aluminum, magnesium, copper, titanium, etc. and their alloys. The original state of the material includes bar stock, ingot, metal powder and liquid metal. The ratio of the cross-sectional area of the metal before deformation to the cross-sectional area after deformation is called the forging ratio. The correct selection of forging ratio, reasonable heating temperature and holding time, reasonable initial forging temperature and final forging temperature, reasonable deformation amount and deformation speed have a great relationship to improve product quality and reduce costs.
Details 白箭头 黑箭头
Forging type contact net fittings
According to the characteristics of railway catenary fittings, in order to shorten the design and manufacturing cycle of forging dies, reduce mold costs and increase the service life of forging dies, a design of quick-change combined forging dies is introduced from the aspects of mold structure, material selection, mold processing and use, etc. Ideas. After production verification, significant results have been achieved. Forging materials are mainly carbon steel and alloy steel with various compositions, followed by aluminum, magnesium, copper, titanium, etc. and their alloys. The original state of the material includes bar stock, ingot, metal powder and liquid metal. The ratio of the cross-sectional area of the metal before deformation to the cross-sectional area after deformation is called the forging ratio. The correct selection of forging ratio, reasonable heating temperature and holding time, reasonable initial forging temperature and final forging temperature, reasonable deformation amount and deformation speed have a great relationship to improve product quality and reduce costs.
Details 白箭头 黑箭头
Mining Machinery Forgings
An impact drilling machine powered by compressed air. According to the propulsion mode, it is divided into hand-held rock drills, air-leg rock drills, telescopic upward rock drills and rail-type rock drills.
Details 白箭头 黑箭头
Forging type contact net fittings
According to the characteristics of railway catenary fittings, in order to shorten the design and manufacturing cycle of forging dies, reduce mold costs and increase the service life of forging dies, a design of quick-change combined forging dies is introduced from the aspects of mold structure, material selection, mold processing and use, etc. Ideas. After production verification, significant results have been achieved. Forging materials are mainly carbon steel and alloy steel with various compositions, followed by aluminum, magnesium, copper, titanium, etc. and their alloys. The original state of the material includes bar stock, ingot, metal powder and liquid metal. The ratio of the cross-sectional area of the metal before deformation to the cross-sectional area after deformation is called the forging ratio. The correct selection of forging ratio, reasonable heating temperature and holding time, reasonable initial forging temperature and final forging temperature, reasonable deformation amount and deformation speed have a great relationship to improve product quality and reduce costs.
Details 白箭头 黑箭头
Other forgings
A workpiece or blank obtained by forging and deforming a metal blank.
Details 白箭头 黑箭头
Forging power fittings
In the heating process, it is necessary to manually put the blank into the induction heating ring, and after heating, the heated blank needs to be taken out and put into the cavity of the forging equipment mold. The labor intensity is high, the production efficiency is low, and the lack of safety is insufficient. Because there is no flash, the utilization rate of the material is higher. It is possible to complete the finishing of complex forgings with one process or several processes. Because there is no flash, the force-bearing area of the forging is reduced, and the required load is also reduced. However, it should be noted that the blanks cannot be completely restricted. For this reason, the volume of the blanks should be strictly controlled, the relative position of the forging dies and the measurement of the forgings should be controlled, and efforts should be made to reduce the wear of the forging dies.
Details 白箭头 黑箭头
Forging type contact net fittings
Forging materials are mainly carbon steel and alloy steel with various compositions, followed by aluminum, magnesium, copper, titanium, etc. and their alloys. The original state of the material includes bar stock, ingot, metal powder and liquid metal. The ratio of the cross-sectional area of the metal before deformation to the cross-sectional area after deformation is called the forging ratio. The correct selection of forging ratio, reasonable heating temperature and holding time, reasonable initial forging temperature and final forging temperature, reasonable deformation amount and deformation speed have a great relationship to improve product quality and reduce costs.
Details 白箭头 黑箭头
Mining Machinery Forgings
An impact drilling machine powered by compressed air. According to the propulsion mode, it is divided into hand-held rock drills, air-leg rock drills, telescopic upward rock drills and rail-type rock drills.
Details 白箭头 黑箭头
Forging power fittings
In the heating process, it is necessary to manually put the blank into the induction heating ring, and after heating, the heated blank needs to be taken out and put into the cavity of the forging equipment mold. The labor intensity is high, the production efficiency is low, and the lack of safety is insufficient. Because there is no flash, the utilization rate of the material is higher. It is possible to complete the finishing of complex forgings with one process or several processes. Because there is no flash, the force-bearing area of the forging is reduced, and the required load is also reduced. However, it should be noted that the blanks cannot be completely restricted. For this reason, the volume of the blanks should be strictly controlled, the relative position of the forging dies and the measurement of the forgings should be controlled, and efforts should be made to reduce the wear of the forging dies.
Details 白箭头 黑箭头
pre
1
2
4

LINKS:baidu | kangbaite

Contact Us

Add:West area of Hejian Economic Development Zone, Cangzhou, Hebei Province

Message

Please leave your valuable comments or suggestions and contact information (email or phone), so that we can reply to you in time!

留言应用名称:
Customer message
描述:
验证码

Hebei KA-Better Electric Power Technology Co., Ltd.

There are 20 lines of forging equipment from 125 tons to 2500 tons, more than 200 sets of automatic NUMERICAL control equipment, 20 automatic raw material cutting lines...

FLANGES

          WeChat

FLANGES

          Mobile

Online customer service
Customer service hotline
0086-317-3603260 0086-317-3603260
Service time:
8:00 - 18:30
Customer service group:
Service
Skype:
Skype:
WhatsApp:

Hebei KA-Better Electric Power Technology Co., Ltd.   冀ICP备2021006979号-1   Powered by www.300.cn